BTEC HND Level 3 Unit 345 PSTN & Data Networks Assignment Sample

Course: Level 3 Advanced Technical Extended Diploma in Digital Technologies

The BTEC HND Level 3 Unit 345 PSTN & Data Networks covers the installation, configuration, and operation of private branch exchange (PBX) systems. This unit also covers the connection of PBXs to the public switched telephone network (PSTN), as well as the installation and configuration of data networks.

Installation activities associated with this unit include installing an IAD (integrated access device), configuring an IP-PBX, and connecting a PBX to an existing data network. Configuration tasks include specifying call routed, defining user features, enabling hunting groups, and configuring VoIP protocols. Operation of a PBX system, once it has been installed, is also covered in this unit, including making changes to the system, and troubleshooting problems with voice quality.

Buy Non Plagiarized & Properly Structured Assignment Solution

Purchase Assignment Sample of PSTN & Data Networks Course and get a discounted price.

We provide a wide range of assignments to suit your needs. Some examples include CIPD levels 3 and 5, BTECs ATHE, HND, or an undergraduate degree in humanities with honors. If you’re looking for something more creative like case studies then we can help there too!

We’re talking about a number of things. Here are some examples:

Assignment Activity 1: Understand types of cabling.

There are three types of cabling: UTP, STP, and ScTP. 

UTP (Unshielded Twisted Pair) cabling is the most common type of cabling and is used in almost all Ethernet networks. It consists of four pairs of copper wires that are twisted together to help reduce interference. 

STP (Shielded Twisted Pair) cabling is similar to UTP cabling but features a shield around each pair of wires to help further reduce interference. 

ScTP (Screened Twisted Pair) cabling is a newer type of cabling that combines the benefits of both UTP and STP cabling. Each pair of wires is shielded, and the entire cable is surrounded by a shield.

Please Write Fresh Non Plagiarized Assignment on this Topic

Assignment Activity 2: Implement Standards controlling PSTN and Data Networks.

There are several standards that control the PSTN and data networks, such as the Ethernet standard, the TCP/IP protocol, and the VoIP standard. 

The Ethernet standard defines how devices on a network communicate with each other. It specifies the type of cable that can be used, the size of the network, the speed of the connection, and the way that data is transmitted across the network. 

The TCP/IP protocol defines how packets of data are routed between devices on a network. It determines the addressing scheme used to route data, as well as the protocols and methods used for communication between devices. 

Finally, the VoIP standard describes how voice data is converted into digital form and transmitted over a data network. It includes the methods and protocols used for voice communication, as well as the quality of service (QoS) standards that must be met to ensure good voice quality.

Assignment Activity 3: Implement a PSTN / Data Networks.

A PSTN / data network can be implemented by using a private branch exchange (PBX) to connect the telephone system to the data network. The PBX will act as a bridge between the two networks and will allow voice and data traffic to be transmitted between the two networks.

The PBX can be configured to allow either simultaneous or sequential transmission of voice and data. In simultaneous transmission, both voice and data are transmitted at the same time. In sequential transmission, the voice is transmitted first, and then the data is transmitted afterward.

The type of connection that is used between the PBX and the data network will depend on the type of data network that is being used. If a LAN is being used, then an Ethernet connection can be used. If a WAN is being used, then a T1 or E1 connection can be used.

The PBX will also need to be configured with the IP address of the data network. This can be done using a DHCP server or by manually configuring the IP address on the PBX.

Once the PBX is configured and connected to the data network, data applications can be used to manage voice traffic. For example, call tracking software can be used to monitor and report on incoming and outgoing calls.

To ensure good voice quality over the PSTN / data network, it is also important to implement QoS standards. These standards will help to prioritize voice traffic over other types of traffic on the network.

Pay & Get Instant Solution of this Assignment of Essay by UK Writers

Dont worry about writing assignments, our professionals will help you!

If you want to hire a professional BTEC assignment helper, then we can be the best option for you. We have a team of highly qualified and experienced writers who are capable of providing you with assignments. Our assignment help experts have years of experience in writing assignments for BTEC students and thousands of satisfied customers. They know what your professors are looking for and how to impress them with their assignments.

When you come to us, we will provide you with a paper with well-researched material and to-the-point content. You can buy HND assignments from us at a very reasonable price.

Our high-quality engineering essays are written keeping in mind your specific requirements and academic standards. We offer genuine essay writing services UK to help you get the best grades. Our dissertation writing services can help you complete your dissertation on time.

Our exam helper serves you exam online help and helps you ace your exams. So, don’t settle for anything less when it comes to success. Come to us and get the best!

Buy Non Plagiarized & Properly Structured Assignment Solution

do you want plagiarism free & researched assignment solution!


Get Your Assignment Completed At Lower Prices

Plagiarism Free Solutions
100% Original Work
24*7 Online Assistance
Native PhD Experts
Hire a Writer Now