NVQ 2346-03 Level 3 Unit 115 Apply Fault Diagnosis and Rectification Assessment Answers

Fault diagnosis and rectification is the process of identifying and correcting errors in a system. It is an important part of maintaining the quality of a system and ensuring its reliability. There are many techniques that can be used for fault diagnosis and rectification, and the choice of technique depends on the nature of the system and the type of error. Some common techniques include testing, debugging, tracing, and monitoring.

Testing is a process of executing a system with the intention of finding errors. It can be used to find both functional and non-functional errors. Debugging is the process of identifying and correcting errors in a system. It involves analyzing a system to identify the cause of an error, and then modifying the system to eliminate the error. Tracing is the process of following the flow of data through a system to identify errors. It can be used to find both functional and non-functional errors. Monitoring is the process of checking the state of a system and recording the results. It can be used to find both functional and non-functional errors.

Buy Non Plagiarized & Properly Structured Assignment Solution

Table of Contents hide

Assessment Task 1: Check it is safe to carry out fault diagnosis.

There are a few things to consider when carrying out fault diagnosis:

  • First, make sure that you have the proper tools and equipment. This will help ensure your safety and the accuracy of your diagnosis.
  • Second, be familiar with the system you’re diagnosing. This will help you know what to look for and how to carry out the diagnosis effectively.
  • Third, follow all safety precautions while carrying out the diagnosis. This includes wearing protective clothing, using appropriate tools and equipment, and following any instructions provided by the manufacturer or other experts.

By following these tips, you can help ensure that fault diagnosis is safe and effective.

Assessment Task 2: Inform the relevant personnel of the fault diagnosis work (such as personnel on the premises, users of electrical equipment).

It is important to inform relevant personnel of any fault diagnosis work that you will be carrying out. This includes personnel on the premises, users of electrical equipment, and other people who may be affected by the work. By informing these people in advance, you can help ensure that they are aware of the work and can take appropriate precautions.

Also, be sure to follow any safety precautions that may be in place. This will help keep everyone safe and avoid any accidents.

Assessment Task 3: Carry out the safe isolation procedure.

Before beginning any work on an electrical system, it is essential to carry out a fault diagnosis and safe isolation procedure. This helps to ensure that the problem is correctly identified and that no one is put at risk of injury during the repair process.

To carry out a fault diagnosis and safe isolation procedure:

  1. Make sure that all power sources are disconnected before beginning any work.
  2. Use a multimeter or other testing device to identify the source of the problem.
  3. Once the problem has been identified, isolate the area using suitable barriers or covers.
  4. Make sure that all relevant safety procedures are followed before carrying out any repairs.

Please Write Fresh Non Plagiarized Assignment on this Topic

Assessment Task 4: Evaluate and apply appropriate methods to ensure the safety of themselves and others when diagnosing and correcting electrical faults.

When diagnosing and correcting electrical faults, it is important to ensure the safety of yourself and others. There are a few key methods that can help with this:

  • Firstly, make sure that you are well-informed about the electrical system you will be working on. Read up on how it works and what safety precautions need to be taken.
  • Secondly, always follow proper procedures when diagnosing and correcting faults. never take shortcuts or take risks that could endanger yourself or others.
  • Finally, if at any point you feel unsure or unsafe, always err on the side of caution and seek professional help. By following these steps, you can help ensure a safe environment for everyone involved.

Assessment Task 5: Communicate effectively with relevant personnel (e.g. customer, premises manager) to ascertain the nature of the fault.

The first step is to identify who you need to communicate with in order to resolve the issue. Depending on the nature of the fault, this may be a customer, your premises manager, or another member of staff.

Once you know who you need to speak to, it’s important to communicate effectively and clearly in order to get the information you need. Be sure to use language that everyone involved will understand, and take care not to inadvertently offend anyone.

If possible, try to stay calm and polite even when things are going wrong. This will help keep the conversation productive and avoid any further problems.

Assessment Task 6: Select and interpret appropriate documents (e.g. layout drawings, schematic diagrams, etc) which relate to the electrical systems and equipment being worked upon.

When you’re looking at documents related to the electrical systems and equipment in your building, it’s important to be able to properly interpret them so that you can understand what’s going on. Here are a few things to look for when you’re trying to do just that:

Voltage: The voltage of an electrical system is the force that pushes electricity through wires and circuits. It’s measured in volts, and you’ll want to make sure that the voltage of the system is compatible with the equipment you’re using.

Circuit Breakers: Circuit breakers are what protect a circuit from overloading. They open up when there’s too much current running through them, which will help protect both the circuit and any equipment plugged into it.

Wiring: The wiring in an electrical system is what carries the current from one component to another. It’s important to make sure that the wiring is of the correct gauge and that it’s properly insulated.

By understanding how to read and interpret these documents, you’ll be able to work on electrical systems with greater confidence and know-how.

Pay & Get Instant Solution of this Assignment of Essay by UK Writers

Assessment Task 7: Assess and communicate potential disruption that may be a consequence of fault diagnosis and correction work to relevant people, such as:

Other workers/colleagues.

If you’re going to be working on an electrical system, it’s important to let other workers or colleagues know so that they can avoid any potential disruption. You should also let them know if there are any safety concerns that they need to be aware of.

Customers / clients.

If your work involves any kind of disruption to customers or clients, it’s important to let them know what’s going on and what they can expect. You should also provide an estimate for how long the work will take.

Assignment Task 8: Carry out relevant inspections of electrical equipment analyzing findings.

The purpose of an electrical equipment inspection is to assess the condition of electrical equipment and identify any potential hazards. The findings of the inspection should be documented in a written report, which can then be used to make decisions about whether or not the electrical equipment should be kept in service, repaired, replaced, or retired.

Some common hazards that may be found during an inspection include:

  • Unsafe wiring and connections
  • Frayed cables
  • Broken insulation
  • Overheated components
  • Damaged power cords
  • Exposed wires
  • Missing or damaged safety devices

If any of these hazards are found, it’s important to take appropriate action to mitigate the risk. This may involve repairing or replacing the electrical equipment, or retiring it from service if it can’t be made safe.

Assessment Task 9: Confirm test instruments are fit for purpose, functioning correctly, and are correctly calibrated.

There are a few key things to keep in mind when confirming that test instruments are fit for purpose, functioning correctly, and correctly calibrated.

First, you’ll want to make sure that the instrument is appropriate for the task at hand and that it is in good working condition.

Secondly, you’ll need to ensure that the instrument is properly calibrated. This can typically be done by following the manufacturer’s instructions or by sending the instrument out to a professional calibration lab.

Finally, once you’ve verified that everything is in order, it’s important to document everything so that there is a record of the process.

Buy Non Plagiarized & Properly Structured Assignment Solution

Assessment Task 10: Perform suitable diagnostic tests, based on engineering decisions, to identify electrical faults. Assess all from the following:

Loss of supply.

A loss of supply can be caused by a number of things, such as a broken wire, a blown fuse, or a tripped circuit breaker. If you’re experiencing a loss of supply, it’s important to troubleshoot the problem and find the source of the issue.

Overload.

An overload can be caused by a number of things, such as too many appliances plugged into a single outlet, an overloaded circuit, or a short circuit. If you’re experiencing an overload, it’s important to troubleshoot the problem and find the source of the issue.

Short-circuit.

A short circuit can be caused by a number of things, such as a loose wire, a damaged appliance, or an overloaded circuit. If you’re experiencing a short-circuit, it’s important to troubleshoot the problem and find the source of the issue.

Earth fault.

An earth fault can be caused by a number of things, such as a loose wire, a damaged appliance, or an electrical ground that’s not properly bonded. If you’re experiencing an earth fault, it’s important to troubleshoot the problem and find the source of the issue.

Incorrect phase rotation.

Incorrect phase rotation can be caused by a number of things, such as a loose wire, a damaged appliance, or an incorrect setting on the circuit breaker. If you’re experiencing incorrect phase rotation, it’s important to troubleshoot the problem and find the source of the issue.

High resistance joints / loose terminations.

High resistance joints or loose terminations can be caused by a number of things, such as a loose wire, a damaged connector, or an incorrect setting on the circuit breaker. If you’re experiencing high resistance joints or loose terminations, it’s important to troubleshoot the problem and find the source of the issue.

Component, accessory, or equipment faults.

Component, accessory, or equipment faults can be caused by a number of things, such as a broken wire, a blown fuse, or a tripped circuit breaker. If you’re experiencing a component, accessory, or equipment fault, it’s important to troubleshoot the problem and find the source of the issue.

Open circuit.

An open circuit can be caused by a number of things, such as a broken wire, a blown fuse, or a tripped circuit breaker. If you’re experiencing an open circuit, it’s important to troubleshoot the problem and find the source of the issue.

Signal faults.

Signal faults can be caused by a number of things, such as interference, noise, or a bad connection. If you’re experiencing a signal fault, it’s important to troubleshoot the problem and find the source of the issue.

Please Write Fresh Non Plagiarized Assignment on this Topic

Assessment Task 11: Use appropriate methods for locating faults including:

Using a logical approach.

There are a number of methods that can be used to locate faults, including using a logical approach. A logical approach involves taking into account the symptoms of the fault, as well as any other known facts about the system. This can help to narrow down the possible causes of the fault and make it easier to find and fix.

Using safe working practices.

This includes following all safety procedures and using the appropriate personal protective equipment (PPE) when working.

When troubleshooting an electrical fault, it’s important to use safe working practices at all times. This includes making sure that you’re aware of the dangers associated with working with electricity and taking steps to protect yourself from potential injuries.

Interpretation of test readings.

This includes using a multimeter or other testing devices to take readings of the electrical circuit. These readings can then be interpreted to help locate the source of the fault.

Assessment Task 12: Use appropriate instruments correctly to carry out fault diagnosis. Assess all of the following:

Voltage indicator.

A voltage indicator can be used to check the voltage of an electrical circuit. This can help to identify whether there is a problem with the voltage supply and can help to locate the source of the fault.

Low resistance ohmmeter.

 

A low resistance ohmmeter (LRO) can be used to measure the resistance of an electrical circuit. This can help to identify whether there is a problem with the resistance in the circuit and can help to locate the source of the fault.

Insulation resistance tester.

An insulation resistance tester (IRT) can be used to measure the insulation resistance of an electrical circuit. This can help to identify whether there is a problem with the insulation in the circuit and can help to locate the source of the fault.

EFLI and PFC tester.

An EFLI tester can be used to measure the amount of electromagnetic interference (EMI) in an electrical circuit. This can help to identify whether there is a problem with the EMI in the circuit and can help to locate the source of the fault.

A PFC tester can be used to measure the power factor of an electrical circuit. This can help to identify whether there is a problem with the power factor in the circuit and can help to locate the source of the fault.

RCD tester.

An RCD tester can be used to measure the amount of current flowing through an electrical circuit. This can help to identify whether there is a problem with the current in the circuit and can help to locate the source of the fault.

Ammeter.

An ammeter can be used to measure the current flowing through an electrical circuit. This can help to identify whether there is a problem with the current in the circuit and can help to locate the source of the fault.

Phase rotation tester.

A phase rotation tester can be used to check the phase rotation of an electrical circuit. This can help to identify whether there is a problem with the phase rotation in the circuit and can help to locate the source of the fault.

Multimeter.

A multimeter can be used to measure a variety of electrical parameters in an electrical circuit. This can help to identify whether there is a problem with any of the parameters in the circuit and can help to locate the source of the fault.

When troubleshooting an electrical fault, it’s important to use appropriate instruments to carry out the diagnosis. This includes using a voltage indicator to check the voltage supply, a low resistance ohmmeter to measure the resistance of the circuit, an insulation resistance tester to measure the insulation resistance of the circuit, and an EFLI tester to measure the amount of EMI in the circuit. It’s also important to use an ammeter to measure the current flowing through the circuit and a multimeter to measure other electrical parameters in the circuit. By using these instruments correctly, you can help to locate the source of the fault and fix it quickly and easily.

Pay & Get Instant Solution of this Assignment of Essay by UK Writers

Assessment Task 13: Assess the appropriate repairs, removals, and replacements and their implications with relevant people including one of the following:

Other workers/colleagues.

Discuss the task and its implications with other workers/colleagues to ensure that they are aware of the repairs, removals, or replacements that are being carried out.

Customers / clients.

Discuss the task and its implications with customers/clients to ensure that they are aware of the repairs, removals, or replacements that are being carried out.

Assignment Task 14: Perform fault correction procedures correctly and safely using appropriate tools, equipment, and material.

Fault correction procedures can be performed safely and effectively by following a few simple steps. First, make sure you have the appropriate equipment and materials on hand. This may include a circuit tester, wire cutters, and electrical tape. Second, identify the problem area and turn off the power to that section of the circuit. Once power is off, carefully remove any damaged or corroded wires and replace them with new ones. Finally, turn the power back on and test the circuit to make sure it is working properly.

If you are not comfortable performing electrical repairs, it is best to call a professional electrician to do the job for you. Fault correction procedures can be dangerous if not performed correctly, so it’s important to take care when working with electricity. Always follow safety guidelines and be aware of potential hazards.

Assignment Task 15: Assess and verify that replacement components and associated equipment maintain:

Ease of access to enable future maintenance.

The replacement components and associated equipment should be easy to access so that they can be maintained in the future. This will help to ensure that the electrical system remains in good working order and that any problems can be quickly and easily fixed.

Compliance with relevant regulations.

The replacement components and associated equipment should meet all relevant safety and regulatory requirements. This will help to ensure that the electrical system is safe and compliant with all applicable standards.

Compliance with manufacturer’s instructions / organizational procedures.

The replacement components and associated equipment should meet all manufacturer’s instructions and organizational procedures. This will help to ensure that the electrical system is installed correctly and that it functions properly.

Buy Non Plagiarized & Properly Structured Assignment Solution

Assignment Task 16: Apply appropriate procedures to ensure electrical equipment and components are left safe, in accordance with industry regulations, if the fault cannot be corrected immediately based on technical assessment.

If a fault cannot be corrected immediately, it is important to take steps to ensure that the electrical equipment and components are left safe. This may involve disconnecting the power supply, isolating the problem area, and marking the area as out of service. It is also important to follow all industry regulations when performing these procedures. Failure to do so could result in serious injury or death.

It is always best to call a professional electrician to correct any electrical faults. Electrical repairs can be dangerous if not performed correctly, so it’s important to take care when working with electricity. Follow all safety guidelines and be aware of potential hazards.

Assignment Task 17: Establish and perform an appropriate inspection and testing procedure to confirm that circuits/equipment/components are functioning correctly after completion of fault correction work.

It’s important to establish and perform an appropriate inspection and testing procedure after completion of any electrical work in order to confirm that circuits/equipment/components are functioning correctly. This helps to ensure the safety of personnel and equipment, as well as prevent fires or other hazardous conditions.

Some common inspection and testing procedures include voltage measurements, continuity tests, insulation resistance tests, and ground-fault current tests. By using these or other appropriate test methods, you can verify that the wiring was done correctly and that the system is safe to operate.

Assessment Task 18: Record test results and other appropriate information regarding the fault correction work clearly and accurately and report it to relevant people. Assess all of the following:

Other workers/colleagues.

It is important to communicate the results of any electrical repairs to other workers or colleagues. This helps to ensure that everyone is aware of the work that was done and the current condition of the system.

Customers / clients.

If you are working for a customer or client, it is important to communicate the results of the work to them. This helps to ensure that they are happy with the work that was done and that their electrical system is in good working order.

Representatives of other services.

If you are working with representatives of other services (e.g. gas, plumbing, HVAC), it is important to communicate the results of the work to them. This helps to ensure that everyone is aware of what was done and that the system is safe and compliant with all applicable standards.

It is also important to record test results and other information regarding the fault correction work clearly and accurately. This helps to ensure that the work is documented and can be referred to in the future if necessary.

Please Write Fresh Non Plagiarized Assignment on this Topic

Avail Top-Quality Assignment Solutions At Affordable Prices From Professionals!

Students Assignment Help UK offers top-class assignment writing services to scholars pursuing their degrees in colleges and universities in the UK. We have a team of professional writers who are well-versed in all the academic disciplines such as marketing, law, nursing, economics, history, literature, etc. All you need to do is say “do my assignment for me” and our writers will be there to help you out with all your writing needs.

We also provide a wide range of academic help such as dissertation writing help, online exam help, and much more at very affordable prices. Our professionals are always available to help you out with all your queries and doubts. You can also hire our expert essay writers to get high-quality essays written for you. Our essays are 100% plagiarism-free and are of the highest quality. So, what are you waiting for? Place your order now and get top-quality assignments at affordable prices.

do you want plagiarism free & researched assignment solution!

UPTO 15 % DISCOUNT

Get Your Assignment Completed At Lower Prices

Plagiarism Free Solutions
100% Original Work
24*7 Online Assistance
Native PhD Experts
Hire a Writer Now