SWE4303 Computing Infrastructure Assessment 1 Sample Answer: Two-Building Network Design and Packet Tracer Proof of Concept

For information and reference only – not to be submitted as your own work.

This extract shows one way to approach the SWE4303 Computing Infrastructure Assessment 1 brief at the University of Bolton. It uses the furniture design and manufacturing scenario and invented student ID digits (X = 4, Y = 7, Z = 2), so all numbers are illustrative. Your own brief will give you different digits, and you must derive and show your own values. For planning advice, read our SWE4303 network design and Packet Tracer guide.

Planning table

Report section Suggested words What markers look for
Business context, requirements, assumptions 350 Services, users, connectivity and reliability needs stated clearly
Addressing and logical design 600 Correct personalised numbers, VLSM table, topology and justification
Services and security 450 One service configured and tested, secure administration, basic controls
Proof of concept evidence 400 Screenshots of configuration, show commands and ping tests
Conclusion and growth 200 Limits of the design and how it could scale

Business context and requirements

The illustrative company has an administration and design building (Building A) and a production and dispatch building (Building B) on one site. A small IT administration area holds an administrator workstation and a server. Staff need shared files, internal communication, a company web page, secure remote administration of network devices and room for growth. Assumptions are stated openly: the buildings are linked by a single wired connection, and the site has no requirement for wireless in this proof of concept.

Personalised addressing

With X = 4, Y = 7 and Z = 2, the base network is 10.0.47.0/24, which falls inside the private range reserved for internal use (Rekhter et al., 1996). The device counts and growth allowance follow from the seed rules in the brief.

Area Rule Devices Growth (20% + Y = 27%) With gateway
Building A staff 20 + X 24 24 × 1.27 = 30.48, so 31 32
Building B staff 10 + Y 17 17 × 1.27 = 21.59, so 22 23
IT administration 5 + Z 7 7 × 1.27 = 8.89, so 9 10

Variable-length subnet masking (VLSM) then allocates the largest requirement first, so that blocks do not overlap and space is not wasted (Fuller and Li, 2006). A /26 gives 62 usable hosts, a /27 gives 30 and a /28 gives 14, and each is the smallest block that fits its requirement.

Subnet Network Mask Usable range Broadcast Gateway
Building A staff 10.0.47.0/26 255.255.255.192 .1 to .62 10.0.47.63 10.0.47.1
Building B staff 10.0.47.64/27 255.255.255.224 .65 to .94 10.0.47.95 10.0.47.65
IT administration 10.0.47.96/28 255.255.255.240 .97 to .110 10.0.47.111 10.0.47.97
Router link 10.0.47.112/30 255.255.255.252 .113 to .114 10.0.47.115 Not applicable

The addresses from 10.0.47.116 to 10.0.47.255 (140 addresses) stay unallocated for future subnets, such as a guest or wireless network.

Buy Non Plagiarized & Properly Structured Assignment Solution

Logical design

Router R1 sits in Building A and connects the staff subnet, the IT administration subnet and the link to Building B. Router R2 sits in Building B and connects the production subnet to the link. A switch serves each area. The administrator workstation (10.0.47.99) and the server (10.0.47.98) are in the IT subnet, which gives administrators a single, controlled place to manage the network.

The design uses a router at each building rather than one flat network. This keeps broadcast traffic local, makes the buildings easy to secure separately, and suits a small site that does not yet need layer 3 switching. Static routes are enough for three subnets, while a routing protocol such as OSPF would be justified if the site grew.

Service and security configuration

The chosen service is DHCP, because it can be configured, tested and evidenced clearly. The server at 10.0.47.98 hands out leases (Droms, 1997), and each router forwards requests from its staff subnet using a helper address (Odom, 2019). Static addresses for the server, administrator workstation and router interfaces are excluded from the pools.

Device Key configuration (illustrative) Purpose
R1 Gi0/0 ip address 10.0.47.1 255.255.255.192; ip helper-address 10.0.47.98 Gateway and DHCP relay for Building A
R1 Gi0/1 ip address 10.0.47.97 255.255.255.240 Gateway for the IT area
R1 Gi0/2 ip address 10.0.47.113 255.255.255.252 Link to R2
R2 Gi0/2 ip address 10.0.47.114 255.255.255.252 Link to R1
R2 Gi0/0 ip address 10.0.47.65 255.255.255.224; ip helper-address 10.0.47.98 Gateway and DHCP relay for Building B
R1 static routes ip route 10.0.47.64 255.255.255.224 10.0.47.114 Reach Building B
R2 static routes ip route 10.0.47.0 255.255.255.192 10.0.47.113; ip route 10.0.47.96 255.255.255.240 10.0.47.113 Reach Building A and the IT area

For secure administration, both routers need a hostname, a domain name, an RSA key pair of at least 2,048 bits, a local user, SSH version 2 and a vty configuration that accepts SSH only. An access list that permits only 10.0.47.96 with wildcard 0.0.0.15 (the IT subnet) can be applied to the vty lines, so staff devices cannot attempt to log in. Passwords should be stored encrypted and unused interfaces shut down.

Proof of concept evidence

Evidence should show that the design works, not just that the devices exist. Useful screenshots and outputs include the following.

  • Addressing: show ip interface brief on both routers, matching the table above.
  • Routing: show ip route on both routers, confirming the connected and static routes.
  • DHCP: a Building A host and a Building B host both receiving addresses from the correct range.
  • Connectivity: pings from a Building B host to the server and to a Building A host, and one failed ping you can explain (for example, before a route is added).
  • Security: an SSH session from the administrator workstation succeeding, and the same attempt from a staff host being refused.

Limitations and growth

The design has a single link between buildings and no redundancy, so a cable fault isolates Building B. A second link with a routing protocol, or a spare path through a switch, would address this at extra cost. The Building A subnet has room for 62 hosts against a requirement of 31, so the 27% growth allowance is comfortably met, while the IT subnet has only 14 usable addresses against 10 needed and would be the first to run out.

If you want help checking your own subnetting table or Packet Tracer file, our Cisco Packet Tracer assignment help page explains what we can review, and our computer network assignment help covers the design justification. You can also submit your assignment brief for a quote.

Please Write Fresh Non Plagiarized Assignment on this Topic

References

Droms, R. (1997) Dynamic Host Configuration Protocol. RFC 2131. Available at: https://www.rfc-editor.org/info/rfc2131 (Accessed: 16 November 2026).

Fuller, V. and Li, T. (2006) Classless Inter-domain Routing (CIDR): the Internet address assignment and aggregation plan. RFC 4632. Available at: https://www.rfc-editor.org/info/rfc4632 (Accessed: 16 November 2026).

Odom, W. (2019) CCNA 200-301 official cert guide, volume 1. Indianapolis: Cisco Press.

Rekhter, Y., Moskowitz, B., Karrenberg, D., de Groot, G.J. and Lear, E. (1996) Address allocation for private internets. RFC 1918. Available at: https://www.rfc-editor.org/info/rfc1918 (Accessed: 16 November 2026).

Prepared by
Students Assignment Help UK Editorial Team

Students Assignment Help UK Editorial Team

This model answer was prepared by our editorial team in response to a real assignment brief we received. It shows one way to approach the task and is meant as a study guide, not for submission.

do you want plagiarism free & researched assignment solution!

UPTO 35% DISCOUNT

Get Your Assignment Completed At Lower Prices

Plagiarism Free Solutions
100% Original Work
24*7 Online Assistance
Native PhD Experts
Hire a Writer Now

Facing Issues with Assignments? Talk to Our Experts Now!Download Our App Now!

Have Questions About Our Services?
Download Our App!

Get the App Today!

QRcode